Ive not posted anything for a long time so I hope you’ve not been waiting with baited breath.
Today though is the 2nd week of nice weather we’ve had so I’m turning my mind to helping people who have necessary but not essential works. By essential I mean that your boilers broken down, if this has happened call us ASAP but if you had that horrible catastrophe happen in December I hope you’ve been able to get over the trauma of 5 days or so that it would have taken for the new boiler to be installed. No, today I want to talk about that radiator in the spare room which was cold but you never bothered checking it out because you weren’t using it (or you wanted your guests to leave quickly). Or possibly you noticed that some of your radiators were hot at the top and cold at the bottom. Or that your boiler was making a loud noise.
If that’s the case then you probably need a powerflush. A Powerflush cleans the inside of the heating system. Its really great when we remove the magnets which are part of our kit and show our customers how much dirt we’ve removed from the radiators.
Most property’s take 1 day to do. We remove the heating pump, attach the powerflush machine, pour non acidic chemicals into it together with water and start pumping. We always have the boiler on as the heat really allows the chemicals to scrub hard and get the insides of your radiators really shiny.
Very rarely the aggressive nature of a powerflush can damage the system as it could find a weak spot say a rusty air vent or a seized valve. We would always advise our customers if this may happen.
Case in point. We were asked to repair a heating pipe with a pinhole leak and also quote for a powerflush. It was very obvious to us that if the pipework was already leaking we shouldn’t push our luck even after we’ve repaired it as there could be another pipe hidden in the loft or under the stairs which would pop with the pressure of the powerflushing machine. Instead we advised a chemical flush where we pour the chemicals into the system and then wait for 2 weeks or so to allow the chemicals to circulate after which we drain the system completely and refill it with clean water and more chemicals to prevent the water from getting dirty again.
If your interested in this Give us a call.